Overview
Introduction and Literature review:
•
• •
•
2. VHDL all its
•
Refer to the data sheet of the specified IC. Insert the pin diagram, and brief description of all the pins of a medium scale digital component assigned to you. You should clearly explain the features and functionality of all pins except VCC and GND. No additional explanation other than pin details are required. Provide necessary references.
Provide the truth table/logic diagram as per the requirement of your design.
Summarize any one application that can be implemented using the medium scale digital component assigned to you.
Pin details and operation of the digital component need to be discussed in the beginning during the demonstration of the task.
code: You are required to develop the VHDL code for the medium scale digital component covering features as per the required modelling style.
The code should be well commented. No additional
VHDL for FPGAs QP
Completely consistent pin description and correct explanation of results on the target board
Reasonably well consistent and correct explanation of results on the target board with pin description
Marginally consistent and correct explanation of results on the target board with partially relevant pin usage
Mostly inconsistent and incorrect explanation of results on the target board with completely irrelevant pin usage.
No explanation or completely inconsistent and incorrect explanation of results on the target board
Presentation skills, Correctness of explanation,
Excellent presentations skills.
Explanation of the work is completely correct.
All the questions are answered correctly.
Very good presentation skills.
Explanation of the work is mostly correct.
Most of the questions are answered correctly.
Fair presentation skills. Explanation of the
work is fairly correct. Some questions are answered correctly.
Minimal presentation skills.
Explanation of the work is minimally correct. Few questions are answered correctly.
Poor presentation skills. Explanation of the work is
mostly incorrect.
Very few or none of the questions are answered correctly.
General Skills (10%)
Teamwork and collaborative skills
Time management skills Leadership skills
Analytical and cognitive skills Responsiveness to group feedback
Excellent Response to the feedback.
Exhibited completely correct understanding. Regular to update the status of various tasks related to project management.
Good Response to the feedback.
Exhibited mostly correct understanding.
Mostly regular to update the status of various tasks related to project management.
Fair Response to the feedback.
Exhibited fairly correct understanding.
Fairly regular to update the status of various tasks related to project management.
Minimally Response to the feedback. Exhibited minimally correct understanding. Minimally regular to update the status of various tasks related to project management.
Poor Response to the feedback.
Exhibited poor understanding.
Irregular to update the status of various tasks related to project management.
• Include evidence, copied from the VHDL design tool that the code compiles successfully without errors in the related report.
• You should show a good understanding of the code during the demonstration of the work.
3. Implementation: You are required to practically demonstrate functional results covering all features of the design for all test cases on Altera DE2-115 target board.
• Insert the images corresponding to the results observed for some of the combinations of input with proper annotation.
• Annotation should be consistent with results obtained on target board. If you just insert images without annotation, the marks will be deducted.
• You should be able to answer the questions during a demonstration of the work. Guidelines about Reports:
1. The font used should be TIMES NEW ROMAN, 18 Points for chapter title, 16 points for sections, 14 points for subsections and 12 Points for the running text with 1.5 line spacing between two consecutive lines.
2. All the figures used in the report must be labelled and provide appropriate citation if applicable.
3. Cover page: Create a cover page with the MEC logo, Dept name, project title, group member details such
as ID and name, Module name and Module Code, and semester details.
4. Provide a table of INDEX.
5. Chapter ONE:
• Introduction: Introduce the topic by mentioning the general description of the IC provided to your group.
• Objectives: State the objectives of your mini project and explain what you set out to achieve.
• Literature review: Provide some background information and mention any relevant literature that
you have reviewed.
6. Chapter TWO:
• Discuss the modeling style assigned to your group and its main features.
• Provide the complete program and evidence of compilation status.
7. Chapter THREE:
• Discuss the pins assigned for the I/O interfacing.
• Insert the images corresponding to the results observed for some of the combinations of input
with prope
8. Chapter FOUR:
• Conclusion: Summarize your project and its key findings. Restate the objectives and explain how
you achieved them.
9. References: Provide a list of all sources that you used in your project, including books, e-library resources,
articles, and websites.
10. Appendices: Include any additional materials that you used in your project, such as images, or data sheets.
74688
Design and Implementation of 8-bit comparator using structural style mode